The Torque Converter is considered to be the most mysterious mechanical component in today’s vehicle. It functions like a clutch, which keeps the motor running even when the vehicle comes to a halt. By designing the stall speeds to matchboth the engine and desired stall speed, an ACC Performance converter will help low-end idle speeds, improve performance and acceleration. We can drastically change the output of the vehicle. ACC Performance can even improve your gas mileage by modifying your torque converter. ACC Performance Torque Converters feature several uses in different industries like industrial power transmissions, automatic transmissions, trucks, buses, and many other applications that include everything from race vehicles to rock crawlers. Proper installation, maintenance, and protection are needed for the torque converter to obtain the longest life possible. A default in the maintenance or heat protection of the torque converter can result in damage such as overheating, stator clutch breakage, fin damage, ballooning, and stator clutch seizure. It is imperative that a transmission cooler be added with any torque converter that is rated over a stock stall.

In a high performance application the so called “transmission cooler” that runs through the radiator is in all actuality a transmission fluid heater. The internal radiator transmission cooler will raise the temperature to normal operating temperature much faster. This make the transmission fluid flow much easier throughout the transmission giving you better fuel mileage. However, the temperatures that the radiator hits does not allow for the proper cooling properties that are needed with today’s high performancetransmissions. Most radiators have an operating temperature of about 200 degrees. There must be a 34.7 degree variance in temperature before an acceptable amount of cooling can occur. The proper way to insure that the correct amount of cooling is taking place would be to by-pass the radiator and go through an external transmission cooler. ACC Performance suggests a minimum of a 3/4” X 10” X 12” size cooler. The addition of an external transmission cooler can drop the transmission fluid temperature more than 10 degrees which can more than double the life of your transmission.

All torque converters operate off of the twisting force of the engine and fluid pressure versus the weight of the vehicle. Do you remember back when you put dual exhaust on a truck and it got a little better gas mileage and engine performance? Well, the reason is: It freed up the exhaust to a point that it would expand the RPM range with the better exhaust flow. It would even give you better midrange and upper RPM power. It also lowered the torque between idle and 2,400 RPM. This change in the pressure on the transmission fluid would lock up the sprag in the stator earlier. You would have to say that the converter locking up earlier allowed the vehicle to move with less RPM. This in turn will give the vehicle better mileage and upper RPM performance.

What makes ACC Performance torque converters better than the rest?
Selling the highest quality Torque Converters since 1971 because we care.As of October 2005 ACC Performance took on a new owner who brings Aircraft Engineering and Quality to the High Performance Torque Converter Industry. ACC Performance uses “World Class Manufacturing”, combined with “Just in Time Manufacturing”, to get you the highest quality parts available combined with impeccable delivery times.

The automotive industry now has a new Torque Converter Leader. ACC Performance Products has emerged as an out-right leader in this industry and here’s why:

The Original BOSS HOG is Welded, not Furnace Brazed (unless requested): Contrary to popular belief, furnace brazing is not the best way to adhere torque converter components together. Just like a Teflon coated cooking pan, after some time the furnace brazing will erode away and ruin the stators and all other rotating parts in your transmission. All BOSS HOG Torque Converters are welded at the fins, not brazed, to eliminate the erosion after time.
We use Industrial Torrington Type Bearings:  No Light Duty Bearings Needle bearings are good, but not great. Industrial bearings give these converters the ability to handle not hundreds, but thousands of pounds of torque.
Aircraft Aluminum Washers: ACC Performance Products Torque Converters utilize an aircraft quality aluminum washer instead of those old fiber washers that other companies use. This will put more horsepower and torque directly to the ground.
Every BOSS HOG is Hand Built: All ACC Converters are hand built and tested to ensure that you are getting the best converter money can buy! No automated process can ensure that kind of quality.
Returns Are Almost 0: With our returns being below 1%, you are assured that you have the highest quality parts that are available on the market.

    The Street Bandit Series Converters are designed to handle as much as 650 horse power. Some of the comparable models will only handle up to 350 horse power.

ACC Performance puts the much larger Torrington type incased bearings through out the converter where they are needed. The Torrington bearings will handle a lot more raw power and abuse that the higher horsepower engines and transmissions of today produce. Some of the competition uses a smaller needle type bearing. Needle bearings are not incased, which makes them susceptible to picking up trash in transmission fluid, which can lead up to heat build up and failure.

We also weld-up and four corner tack-weld our turbine and impeller fins in order to maintain the highest strength. This will stop fin degradation or deformity. We also have custom engineered our turbine hubs in order to maintain the highest quality, strength, and durability. Some of the competitors use a chromemoly steel turbine hub that does not weld very well. If improperly welded, it can cause converter failure and or damage to your transmission.

The stators are built with high flow vents and channels for greater cooling in order to handle the much greater power and heat ranges.

Some of the competitors use a dual bolt pattern on their converter in order for one converter to fit more applications.

ACC Performance converters are engineered with a single bolt pattern for the rotating mass. This makes ACC Performance Torque Converters surprisingly light, keeping the weight of the converter off of the rotating mass of the motor. This will free up your motor and allow it to rev-up through the RPM range quicker, helping your engine put more power to the ground. Some of the competitors use a dual bolt pattern converter to eliminate multiple part numbers, i.e./ th350 & 400’s. These transmissions using the same converter with a dual bolt pattern, will add 3 to 4 pounds of weight to the converter. This adds weight to the ro-tating mass of the engine, costing you nothing but horsepower & torque. We at ACC are in the performance business and try to maximize horsepower at every level. We think you do too! NOTE: The Street Bandit series converters are NOT designed to handle the extreme shock and abuse of Nitrous Oxide or Trans-Breaks. Call ACC Performance for more information.

Boss Hog Mopar Night Stalker Torque Converters

DescriptionBoss Hog StockBoss Hog Ultra TowBoss Hog 16-2200 Level 1Boss Hog 22-2800 Level 2
CHRYSLER 67-Up, TF-727 24 Spline, Non-Lock Up 12" Core 54090
$233,25
5401HD
$249.14
54092
$273.93
CHRYSLER 67-Up, TF-727 24 Spline, Non-Lock Up 11" Core * Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern54093
$368.59
CHRYSLER 67-Up, TF-727 24 Spline, Non-Lock Up 10" Core * Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern54062
$496.46
CHRYSLER 67-Up, TF-727 24 Spline 12" Core, With Weights, Non Lock-Up54080
$230.94
5408HD
$249.14
54082
$273.93
CHRYSLER 67-Up, TF-727 24 Spline 11" Core, With Weights, Non Lock-Up* Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern* Hemi Requires 10" Bolt Pattern54083
$368.59
CHRYSLER 67-Up, TF-727 24 Spline 10" Core, With Weights, Non Lock-Up*Requires 10" Bolt Pattern*Requires 10" Bolt Pattern*Requires 10" Bolt Pattern54072
$496.46
CHRYSLER 67-Up, 12" Core, TF-904 Non Lock - Up53020
$233.25
53022
$273.93
53023
$368.59
CHRYSLER 67-Up, 12" Core, TF-904 Non Lock - Up With Weights 12" Core53080
$233.25
53082
$273.93
53083
$368.59
CHRYSLER 67-Up, 12" Core, TF-904 Non Lock - Up With Weights 10" Core53072
$501.48
DODGE CHARGER 07-UP, 48RE , Lock Up66400
$425.75
6640HD
$472.63
66402
$487.25
CHRYSLER 670A 22-24 Spline55400
$355.62
55402
$407.58
CHRYSLER 1993-1995 A-518 Lock Up, 23 Spline51800
$303.65
5180HD
$314.86
51802
$424.46
CHRYSLER 1996 - Up A-518 Lock Up, 23 Spline 90 Degree Bolt Pattern51900
$303.65
5190HD
$314.86
5190HD
$314.86
CUMMINGS DIESEL5844HD
$1158.73
6

Boss Hog Mopar Street Bandit Torque Converters

DescriptionBoss Hog 28-3200 Level 1Boss Hog 32-3600 Level 2Boss Hog 36-4200 Level 3Boss Hog 42-5000 Level 4
CHRYSLER 67-Up, TF-727 24 Spline, Non-Lock Up 11" Core 54053
$461.62
CHRYSLER 67-Up, TF-727 24 Spline, Non-Lock Up 10" Core 54094
$551.73
54095
$604.27
54096
$635.20
54097
$676.66
CHRYSLER 67-Up, TF-727 24 Spline 11" Core, With Weights, Non Lock-Up54073
$461.82
CHRYSLER 67-Up, TF-727 24 Spline 10" Core, With Weights, Non Lock-Up54084
$551.73
54085
$604.27
54086
$635.20
54087
$676.66
CHRYSLER 67-Up, 12" Core, TF-904 Non Lock - Up53020
$230.94
53022
$271.22
53023
$364.94
CHRYSLER 67-Up, 12" Core, TF-904 Non Lock - Up With Weights53053
$461.62
CHRYSLER 67-Up, 10" Core, TF-904 Non Lock - Up With Weights53024
$557.25
CHRYSLER 67-Up, TF-904 Non-Lock - Up, With Weights, 12" Core53073
$461.62
CHRYSLER 67-Up, TF-904 Non-Lock - Up, With Weights, 10" Core53084
$557.25
53085
$603.14
53086
$635.20
53087
$676.66
DODGE CHARGER 07-UP, 48RE , Lock Up66403
$511.94
CHRYSLER 670A 22-24 Spline 55403
$497.36
CHRYSLER 1993-1995 A-518 Lock Up, 23 Spline51803
$509.34
CHRYSLER 1996 - Up A-518 Lock Up, 23 Spline 90 Degree Bolt Pattern51903
$509.34

Boss Hog Mopar Outlaw Torque Converters

DescriptionWild Boar 24-2800 Level 1Wild Boar, 28-3200, Level 2Wild Boar, 32-3500 Level 3Wild Boar, 35-4200, Level 4Wild Boar, 42-5000, Level 5
CHRYSLER 67-Up, TF-727 24 Spline, Non Lock Up 10" Core54793
$567.20
54753
$599.27
54743
$637.27
54794
$662.41
54795
$739.59
CHRYSLER 67-Up, TF-727 24 Spline, 10" Core, With Weights, Non Lock-Up54783
$567.20
54473
$599.27
54763
$637.27
54784
$662.41
54785
$739.59
CHRYSLER 67-Up, TF-727 24 Spline, 10" Core, With Weights, Non Lock-Up53723
$567.20
53753
$599.27
53743
$637.27
53724
$662.41
53725
$739.59
CHRYSLER 67-Up. TF-904, Non Lock - Up, With Weights 10" Core53783
$567.20
53773
$599.27
53763
$637.27
53784
$662.41
53785
$739.59
Picking the stall range for your Restoration or Street Vehicle can be a little tricky. Cataloged stall ranges are picked by the vehicle’s basic set-up (i.e. horse power, engine torque, vehicle weight, etc.). The stall range will vary from car to car. This means, the converter must be matched up to fit your specific vehicle’s set up. A built engine with all the goodies will need more stall in order for the engine to idle correctly. We would suggest you consider one of our Night Stalker style converters.

how-to-pick-a-stall

WARNING: All stall ranges will vary depending on engine’s set-up vs. weight of the vehicle vs. gear ratio. *All Mopar – Must know if internally balanced or not and 5/16 or 3/8 or 7/16 converter bolts If you have engine modifications, intake, cam or a modified exhaust system, then you may want to give our techs a call at (888) 267-7464. Changing the weight of the vehicle will affect the stall. Let us help you pick the torque converter for your vehicle. Example: Let’s take a street rod that weighs 1,900 lbs to 2,400 lbs. The weight of the vehicle will drastically reduce the stall of the torque converter. To set a stall on a 1900 lb. street rod at 1,800 rpm, you would need a converter with a stall speed of around 5,000 rpm. torque-converter-installation-instructions

WARRANTY ACC Performance Products Plus, Inc. warranties its torque converters against manufacturer’s defects for a period of 90 days from the date of purchase. That will include the bearings, hubs, and stators. NOTE: IMPROPER INSTALLATION AND MISS PICKED STALL RANGES ARE NOT WARRANTY. FOR INFORMATION ON STALL RANGES, INSTALLATION AND WARRANTY call 888-267-7464 to have ACC Performance’s technicians help you pick a stall converter to best fit your application.
ACC Performance - Boss Hog Mopar Street Bandit Torque Converter
ACC Performance – Boss Hog Mopar Street Bandit Torque Converter (cutaway)
ACC Performance - Boss Hog Mopar Street Bandit Torque Converter
ACC Performance – Boss Hog Mopar Street Bandit Torque Converter